They have all used the heat transfer adhesive. It has strong connectivity, and it is difficult to remove it after it is stuck on. Many friends do not know the correct removal method of the heat transfer adhesive. When removing the heat transfer adhesive, they not only did not remove the heat transfer adhesive, but also damaged the adhered object. Today, I will teach you how to remove heat transfer adhesive.
1. Mechanical division.
This method is simple. It mainly uses impact or knock to open the glue. This method is suitable for use on objects with hard surfaces. If the surface is brittle and easy to crack, this method is not suitable. When using this method, be sure to fix one end of the connection, and then hit the other end of the connection with the gravity of a hard object. When striking, be sure to master the strength and pay attention to safety. If the force is too strong, the other end will fly out, which is very easy to cause injury.
2. Heating and division.
In this method, the temperature of the connected object shall be heated to the high tolerance temperature or higher temperature of the thermal conductive adhesive. When the high temperature environment lasts for a period of time, carbonization will occur. At this time, it will become invalid. At this time, it is easy to clean the pouring glue. Pay attention to prevent scalding when using this method. The protection work shall be done well. The temperature under high temperature is very high. If you clean it with your bare hands, you can easily burn your hands. Please prepare the tools in advance.
3. Dissolution removal method
To use the dissolution and removal method, first understand the composition of the thermal conductive adhesive. If the phosphate inorganic adhesive is used, prepare ammonia water for dissolution. If the silicate inorganic adhesive is used, it can be dissolved with water. If phenolic acetal adhesive is used, it can only be dissolved with concentrated caustic soda water. Pay attention to safety and protection when using solvents.
Three removal methods are introduced above. I believe you have learned them. If you need to remove the thermal conductive adhesive in the future, try these methods.
QQ